Abstract
The primary objective of any Biopharmaceutical Product Changeover (PCO) program is to employ control strategies before, during, and after the manufacturing process, as well as from the beginning of the lifecycle approach for the equipment and validation, which will minimize the opportunity for cross- contamination when switching between products. Evaluation of the need for an Elastomer Change Out (ECO) should be considered as a segment of an overall changeover assessment. Lifecycle systems (e.g. Preventive Maintenance (PM), Cleanability Coupon Testing, Good Engineering Practices, etc.) and procedures should be in place and data should be generated demonstrating the soft parts do not harbor residues from the previous product campaign(s). The determination of whether or not to replace elastomers/soft parts should be made in the context of all of these systems along with the proper assessment of Risk. By understanding the actual value of ECO in terms of the overall PCO program, and the other systems and procedures that are in place that protect against cross contamination, the need for ECO for every product changeover is not necessary. The purpose of this paper is to review the practice of ECO at product changeover, evaluate the need for an ECO using a risk based approach, and provide rationale for justifying the reduction or elimination of ECO at product changeover.
- Received April 20, 2017.
- Accepted September 7, 2017.
- Copyright © 2017, Parenteral Drug Association
PDA members receive access to all articles published in the current year and previous volume year. Institutional subscribers received access to all content. Log in below to receive access to this article if you are either of these.
If you are neither or you are a PDA member trying to access an article outside of your membership license, then you must purchase access to this article (below). If you do not have a username or password for JPST, you will be required to create an account prior to purchasing.
Full issue PDFs are for PDA members only.
Note to pda.org users
The PDA and PDA bookstore websites (www.pda.org and www.pda.org/bookstore) are separate websites from the PDA JPST website. When you first join PDA, your initial UserID and Password are sent to HighWirePress to create your PDA JPST account. Subsequent UserrID and Password changes required at the PDA websites will not pass on to PDA JPST and vice versa. If you forget your PDA JPST UserID and/or Password, you can request help to retrieve UserID and reset Password below.