Abstract
The objective of this study was to seek improvement in the emulsification efficacy of lecithin by formulation design. A Base Emulsion was developed containing lecithin as the primary emulsifier. The lecithin concentration and method of preparation of the Base Emulsion were optimized to obtain minimum particle size and creaming of the emulsion. Selected hydrophilic and hydrophobic synthetic surfactants were evaluated as secondary emulsifiers for their ability to reduce particle size of the Base Emulsion. The selection of type and concentration of the secondary emulsifier was done by application of the HLB method. The hydrophilic emulsifiers selected were Tween® 80, Tween® 20, Pluronic® F68, and Pluronic® F127. The hydrophobic surfactants studied included Span® 20, Span® 80, Pluronic® P103, and Pluronic® P123. The median droplet size of the Base Emulsion was 2.7 μm. Addition of the hydrophilic emulsifiers caused an increase in particle size and substantial creaming of the emulsions. Addition of three of four hydrophobic surfactants resulted in particle size reduction, but the emulsions showed substantial creaming. Span® 20 was found to be the most effective secondary emulsifier. The median particle size of the emulsion was 1.7 μm. These results suggest that supplementing the hydrophilic attributes of lecithin with an appropriate type and amount of hydrophobic surfactant improves the emulsion properties by applying principles of formulation design.
Footnotes
- Received December 10, 1997.
- Accepted May 13, 1998.
- Copyright © Parenteral Drug Association. All rights reserved.
PDA members receive access to all articles published in the current year and previous volume year. Institutional subscribers received access to all content. Log in below to receive access to this article if you are either of these.
If you are neither or you are a PDA member trying to access an article outside of your membership license, then you must purchase access to this article (below). If you do not have a username or password for JPST, you will be required to create an account prior to purchasing.
Full issue PDFs are for PDA members only.
Note to pda.org users
The PDA and PDA bookstore websites (www.pda.org and www.pda.org/bookstore) are separate websites from the PDA JPST website. When you first join PDA, your initial UserID and Password are sent to HighWirePress to create your PDA JPST account. Subsequent UserrID and Password changes required at the PDA websites will not pass on to PDA JPST and vice versa. If you forget your PDA JPST UserID and/or Password, you can request help to retrieve UserID and reset Password below.