Abstract
Capture bioprocessing unit operations were previously shown to clear or kill several log10 of a model mycoplasma Acholeplasma laidlawii in lab-scale spike/removal studies. Here, we confirm this observation with two additional mollicute species relevant to biotechnology products for human use: Mycoplasma orale and Mycoplasma arginini. Clearance of M. orale and M. arginini from protein A column purification was similar to that seen with A. laidlawii, though some between cycle carryover was evident, especially for M. orale. However, on-resin growth studies for all three species revealed that residual mycoplasma in a column slowly die off over time rather than expanding further. Solvent/detergent exposure completely inactivated M. arginini though detectable levels of M. orale remained. A small-scale model of a commercial low-pH hold step did inactivate live M. orale, but this inactivation required a lower pH set point and occurred with slower kinetics than previously seen with A. laidlawii. Additionally, ultraviolet-C irradiation was shown to be effective for A. laidlawii and M. orale inactivation whereas virus-retentive filters for upstream and downstream processes, as expected, cleared A. laidlawii. These data argue that M. orale and M. arginini overall would be largely cleared by early bioprocessing steps as shown previously for A. laidlawii, and that barrier technologies can effectively reduce the risk from media components. For some unit operations, M. orale and M. arginini may be hardier, and require more stringent processing or equipment cleaning conditions to assure effective mycoplasma reduction. By exploring how some of the failure modes in commercial antibody manufacturing processes can still eliminate mycoplasma burden, we demonstrate that required best practices assure biotechnology products will be safe for patients.
- Mycoplasma
- Acholeplasma laidlawii
- Mycoplasma arginini
- Mycoplasma orale
- Bioprocessing
- Protein A chromatography
- Chromatography column/media
- Solvent/detergent
- Low-pH hold
- Spike/clearance
- Cell culture
- Viral filter
- Media filter
- Ultraviolet-C irradiation
Footnotes
- © PDA, Inc. 2020
PDA members receive access to all articles published in the current year and previous volume year. Institutional subscribers received access to all content. Log in below to receive access to this article if you are either of these.
If you are neither or you are a PDA member trying to access an article outside of your membership license, then you must purchase access to this article (below). If you do not have a username or password for JPST, you will be required to create an account prior to purchasing.
Full issue PDFs are for PDA members only.
Note to pda.org users
The PDA and PDA bookstore websites (www.pda.org and www.pda.org/bookstore) are separate websites from the PDA JPST website. When you first join PDA, your initial UserID and Password are sent to HighWirePress to create your PDA JPST account. Subsequent UserrID and Password changes required at the PDA websites will not pass on to PDA JPST and vice versa. If you forget your PDA JPST UserID and/or Password, you can request help to retrieve UserID and reset Password below.