Abstract
The freezing of biologics has been widely studied from the physical chemistry point of view, for instance in terms of cryo-concentration, excipient crystallization, pH swing, potential protein denaturation, etc. In contrast, considerations on the processing aspects are very limited. For instance, the impact of freezer temperature, container size, freezer load, and freeze chilling capacity on the freezing rate in the most frequent case of freezing in a bottle have not been reported. In this study, the freezing time of either water or buffer solution was measured in various processing conditions. Experimental trials were conducted using containers ranging from 1 to 20 L in two types of freezers: a normal freezer (−30°C set point) and an ultra freezer (−70°C set point). These trials showed that both the container size and the freezer load influenced the freezing times. The current study demonstrated that the use of the well-established Plank model for freezing, coupled with freezer performance characterization, allows the description of the actual freezing kinetics in a very simple and accurate manner. The kinetics can then be modeled to accurately predict both the actual freezer temperature (possibly above the set point) and the freezing time based on freezer load.
- © PDA, Inc. 2021
PDA members receive access to all articles published in the current year and previous volume year. Institutional subscribers received access to all content. Log in below to receive access to this article if you are either of these.
If you are neither or you are a PDA member trying to access an article outside of your membership license, then you must purchase access to this article (below). If you do not have a username or password for JPST, you will be required to create an account prior to purchasing.
Full issue PDFs are for PDA members only.
Note to pda.org users
The PDA and PDA bookstore websites (www.pda.org and www.pda.org/bookstore) are separate websites from the PDA JPST website. When you first join PDA, your initial UserID and Password are sent to HighWirePress to create your PDA JPST account. Subsequent UserrID and Password changes required at the PDA websites will not pass on to PDA JPST and vice versa. If you forget your PDA JPST UserID and/or Password, you can request help to retrieve UserID and reset Password below.