Abstract
The Instron method of residual seal force measurement is used to study the effects of various closure, time, and processing variables on the residual seal force of parenteral vials. Control vials machined from aluminum with flat, 20-mm serum finishes are used to eliminate inaccuracies inherently caused by glass vial finish variations. The Instron residual seal force is demonstrated to be dependent on closure variables of elastomer formulation, formulation batch, and certain types of inert polymeric coatings. Using halobutyl closures, the seal force is shown to decay with time post sealing and as a result of "terminal" autoclaving
- Received November 25, 1987.
- Accepted February 16, 1988.
- Copyright © Parenteral Drug Association. All rights reserved.
PDA members receive access to all articles published in the current year and previous volume year. Institutional subscribers received access to all content. Log in below to receive access to this article if you are either of these.
If you are neither or you are a PDA member trying to access an article outside of your membership license, then you must purchase access to this article (below). If you do not have a username or password for JPST, you will be required to create an account prior to purchasing.
Full issue PDFs are for PDA members only.
Note to pda.org users
The PDA and PDA bookstore websites (www.pda.org and www.pda.org/bookstore) are separate websites from the PDA JPST website. When you first join PDA, your initial UserID and Password are sent to HighWirePress to create your PDA JPST account. Subsequent UserrID and Password changes required at the PDA websites will not pass on to PDA JPST and vice versa. If you forget your PDA JPST UserID and/or Password, you can request help to retrieve UserID and reset Password below.