Abstract
To establish a simpler and more reliable method for retaining the aseptic condition of freeze-dried bulk product of a drug substance, a helium leak test method was developed. The bulk product is for the new kit system for infusion of our antibiotic product.
In manufacturing the kit system, the bulk product needs to be transported outside of the aseptic area. We had to use a proper container to enclose the bulk product under aseptic conditions and establish an appropriate method for sterility assurance of the container. We decided to use a flexible aluminum laminate bag as a container and to seal it in a poly-ethylene bag. To detect tears or pinholes in the bag, a helium leak test was considered.
As a tear model, a pinhole of known diameter was made in the aluminum laminate bag which was then filled with helium and sealed in a polyethylene bag. Helium leaking from the pinholes was measured with a helium leak detector, and leakage from a pinhole of more than 50 μm in the aluminum laminate bag could be detected. The amount of leakage was strongly affected by the pinhole diameter, and we developed a scientific approach for measuring leakage using the Poiseiulle Equation. The detection sensitivity of our method was enough to retain an aseptic condition inside the aluminum laminate bag, confirmed by the results of the process simulation test using our helium leak test. We concluded that our helium leak test was useful for sterility assurance of the bulk product sealed in the aluminum laminate bag in the manufacturing process of our kit system for infusion of our antibiotic product.
- sterility assurance
- helium leak test
- pinhole diameter
- aluminum laminate bag
- polyethylene bag
- process simulation test
Footnotes
- Copyright © Parenteral Drug Association. All rights reserved.
PDA members receive access to all articles published in the current year and previous volume year. Institutional subscribers received access to all content. Log in below to receive access to this article if you are either of these.
If you are neither or you are a PDA member trying to access an article outside of your membership license, then you must purchase access to this article (below). If you do not have a username or password for JPST, you will be required to create an account prior to purchasing.
Full issue PDFs are for PDA members only.
Note to pda.org users
The PDA and PDA bookstore websites (www.pda.org and www.pda.org/bookstore) are separate websites from the PDA JPST website. When you first join PDA, your initial UserID and Password are sent to HighWirePress to create your PDA JPST account. Subsequent UserrID and Password changes required at the PDA websites will not pass on to PDA JPST and vice versa. If you forget your PDA JPST UserID and/or Password, you can request help to retrieve UserID and reset Password below.