TY - JOUR T1 - Quality Risk Management: Putting GMP Controls First JF - PDA Journal of Pharmaceutical Science and Technology JO - PDA J Pharm Sci Technol SP - 243 LP - 261 DO - 10.5731/pdajpst.2012.00859 VL - 66 IS - 3 AU - Kevin O'Donnell AU - Anne Greene AU - Michael Zwitkovits AU - Nuala Calnan Y1 - 2012/05/01 UR - http://journal.pda.org/content/66/3/243.abstract N2 - This paper presents a practical way in which current approaches to quality risk management (QRM) may be improved, such that they better support qualification, validation programs, and change control proposals at manufacturing sites. The paper is focused on the treatment of good manufacturing practice (GMP) controls during QRM exercises. It specifically addresses why it is important to evaluate and classify such controls in terms of how they affect the severity, probability of occurrence, and detection ratings that may be assigned to potential failure modes or negative events. It also presents a QRM process that is designed to directly link the outputs of risk assessments and risk control activities with qualification and validation protocols in the GMP environment. LAY ABSTRACT: This paper concerns the need for improvement in the use of risk-based principles and tools when working to ensure that the manufacturing processes used to produce medicines, and their related equipment, are appropriate. Manufacturing processes need to be validated (or proven) to demonstrate that they can produce a medicine of the required quality. The items of equipment used in such processes need to be qualified, in order to prove that they are fit for their intended use. Quality risk management (QRM) tools can be used to support such qualification and validation activities, but their use should be science-based and subject to as little subjectivity and uncertainty as possible. When changes are proposed to manufacturing processes, equipment, or related activities, they also need careful evaluation to ensure that any risks present are managed effectively. This paper presents a practical approach to how QRM may be improved so that it better supports qualification, validation programs, and change control proposals in a more scientific way. This improved approach is based on the treatment of what are called good manufacturing process (GMP) controls during those QRM exercises. A GMP control can be considered to be any control that is put in place to assure product quality and regulatory compliance. This improved approach is also based on how the detectability of risks is assessed. This is important because when producing medicines, it is not always good practice to place a high reliance upon detection-type controls in the absence of an adequate level of assurance in the manufacturing process that leads to the finished medicine. ER -