Abstract
Experiments were carried out to relate the airborne dispersion of microbes to the occlusive properties of fabrics and the design of clean room clothing. The pore size, air and particle penetration of the fabrics were determined and these gave a good indication of their contamination control properties when made up into complete garments. Good fabrics with moderate air and particle permeability and a bubble point pore diameter of about 20 μm reduced microbial dispersion to at least 10% of poor fabrics. However, the best fabrics, as determined by fabric tests, proved to be very impermeable to air exchange. When these impermeable fabrics were made into garments, a person’s movements forced air out of the garment’s closures, thus causing more microbial dispersion than that found from garments made of less impenetrable fabrics. The design of garments was also studied. The greatest reduction in microbial dispersion was obtained from designs which fully enveloped and enclosed the wearer. A conventional but well-designed coverall made from a good fabric, with hood and full-length boots, could reduce airborne microbial dispersion to about 4% of that dispersed through a surgical gown. However, when highly impenetrable fabric was made into clothing with special closures designed to prevent the pumping out of bacteria-laden air, the bacterial dispersion could be reduced to at least 1% that of a coverall made of poor fabric.
- Received June 11, 1984.
- Accepted November 13, 1984.
- Copyright © Parenteral Drug Association. All rights reserved.
PDA members receive access to all articles published in the current year and previous volume year. Institutional subscribers received access to all content. Log in below to receive access to this article if you are either of these.
If you are neither or you are a PDA member trying to access an article outside of your membership license, then you must purchase access to this article (below). If you do not have a username or password for JPST, you will be required to create an account prior to purchasing.
Full issue PDFs are for PDA members only.
Note to pda.org users
The PDA and PDA bookstore websites (www.pda.org and www.pda.org/bookstore) are separate websites from the PDA JPST website. When you first join PDA, your initial UserID and Password are sent to HighWirePress to create your PDA JPST account. Subsequent UserrID and Password changes required at the PDA websites will not pass on to PDA JPST and vice versa. If you forget your PDA JPST UserID and/or Password, you can request help to retrieve UserID and reset Password below.