Abstract
Microscopic monitoring of 50 commercial products comprising five distinct product types revealed that the particle levels were quite different. Dry products and multidose vials showed high counts while the large volume parenterals and prefilled syringes were relatively clean. The log-log plot was found to be the most appropriate plotting technique for all product types. By plotting all the data for each product type a mean curve was obtained. From the mean a 90% distribution curve was calculated. This curve was parallel to the mean curve suggesting its suitability as a standard. The proposed USP standard for small volume parenterals which covers all product types using a light blockage technique is criticized and a proposal for selecting and monitoring samples on a product type basis is presented.
- Received November 19, 1985.
- Accepted November 27, 1985.
- Copyright © Parenteral Drug Association. All rights reserved.
PDA members receive access to all articles published in the current year and previous volume year. Institutional subscribers received access to all content. Log in below to receive access to this article if you are either of these.
If you are neither or you are a PDA member trying to access an article outside of your membership license, then you must purchase access to this article (below). If you do not have a username or password for JPST, you will be required to create an account prior to purchasing.
Full issue PDFs are for PDA members only.
Note to pda.org users
The PDA and PDA bookstore websites (www.pda.org and www.pda.org/bookstore) are separate websites from the PDA JPST website. When you first join PDA, your initial UserID and Password are sent to HighWirePress to create your PDA JPST account. Subsequent UserrID and Password changes required at the PDA websites will not pass on to PDA JPST and vice versa. If you forget your PDA JPST UserID and/or Password, you can request help to retrieve UserID and reset Password below.