Abstract
Cleaning validation has received increasing attention by the FDA in recent inspections, yet very little has been published regarding practices within the pharmaceutical industry. This presentation will review several of aspects of the validation of equipment cleaning procedures. A significant portion of the presentation is derived from round table discussions the author has led over the last several years on this subject. Specific areas to be defined include: sampling methods, analytical methods, physical parameters, and of greatest interest, the selection of acceptance criteria. The presentation also includes some additional perspectives on the subject of cleaning validation developed by the author which may prove useful to the practitioner.
- Received January 6, 1992.
- Accepted April 13, 1992.
- Copyright © Parenteral Drug Association. All rights reserved.
PDA members receive access to all articles published in the current year and previous volume year. Institutional subscribers received access to all content. Log in below to receive access to this article if you are either of these.
If you are neither or you are a PDA member trying to access an article outside of your membership license, then you must purchase access to this article (below). If you do not have a username or password for JPST, you will be required to create an account prior to purchasing.
Full issue PDFs are for PDA members only.
Note to pda.org users
The PDA and PDA bookstore websites (www.pda.org and www.pda.org/bookstore) are separate websites from the PDA JPST website. When you first join PDA, your initial UserID and Password are sent to HighWirePress to create your PDA JPST account. Subsequent UserrID and Password changes required at the PDA websites will not pass on to PDA JPST and vice versa. If you forget your PDA JPST UserID and/or Password, you can request help to retrieve UserID and reset Password below.