Particle Size Reduction of Emulsions by Formulation Design I: Effect of Polyhydroxy Alcohols

Gurmukh D. Chanana; Bhogi B. Sheth

Abstract

The objective of this study was to characterize the effect on particle size and stability of oil-in-water emulsion formulations caused by the addition of polyhydroxy alcohols. Stable soybean oil and hexadecane emulsions were prepared containing increasing amounts of propylene glycol (PG) and glycerol (GLY). A nonionic emulsifier system consisting of Tween 80 and Span 80 was used to achieve optimal stability. Particle size was found to decrease as the level of PG or GLY increased. A three-fold particle size reduction was obtained at a PG level of 40% w/w and at a GLY level of 70% w/w. The particle size of soybean oil emulsions decreased from about 4.8 μm to about 1.7 μm. The particle size of hexadecane emulsions decreased from about 2.7 μm to less than 1 μm. The increase in emulsion viscosity was found to be proportional to the amount of polyhydroxy alcohols added to the formulation. The particle size and creaming stability of the emulsions were found to improve with increasing PG or GLY concentration.

Received May 8, 1992.
Accepted September 24, 1992.

PDA members receive access to all articles published in the current year and previous volume year. Institutional subscribers received access to all content. Log in below to receive access to this article if you are either of these.

If you are neither or you are a PDA member trying to access an article outside of your membership license, then you must purchase access to this article (below). If you do not have a username or password for JPST, you will be required to create an account prior to purchasing.

Full issue PDFs are for PDA members only.

Note to pda.org users

The PDA and PDA bookstore websites (www.pda.org and www.pda.org/bookstore) are separate websites from the PDA JPST website. When you first join PDA, your initial UserID and Password are sent to HighWirePress to create your PDA JPST account. Subsequent UserrID and Password changes required at the PDA websites will not pass on to PDA JPST and vice versa. If you forget your PDA JPST UserID and/or Password, you can request help to retrieve UserID and reset Password below.