Abstract
The stability of cefazolin 1 g in metronidazole 500 mg/100 mL at 8°C was studied for use as an TV admixture. The commercially available injection of cefazolin sodium 1 g vial was diluted to 5 mL with 0.9% sodium chloride injection and added to metronidazole 500 mg/100 mL. Following dilution of 2 mL to 100 mL with water, 1-mL aliquots were transferred to glass vials, refrigerated at 8°, and assayed for cefazolin and metronidazole concentration at 0, 1, 2, 4, 8, 12, 24, 36, 48, and 72 hours after preparation. The concentration of cefazolin and metronidazole was determined by a stability-indicating high-performance liquid chromatographic method. The range of concentration was determined to be within 5% of the 0-hour mean concentration. Over the 72-hour period, the mean concentration of cefazolin at all assay times was within 98.4 to 101.0% of the initial concentration. The mean concentration of metronidazole at each assay time was 96.9 to 104.9% of the initial concentration. Cefazolin sodium 10 mg/mL and metronidazole 5 mg/mL, prepared by adding reconstituted cefazolin to a glass bottle of metronidazole ready-to-use solution, were stable for 72 hours when stored at 8°C.
- Received May 22, 1992.
- Accepted October 7, 1992.
- Copyright © Parenteral Drug Association. All rights reserved.
PDA members receive access to all articles published in the current year and previous volume year. Institutional subscribers received access to all content. Log in below to receive access to this article if you are either of these.
If you are neither or you are a PDA member trying to access an article outside of your membership license, then you must purchase access to this article (below). If you do not have a username or password for JPST, you will be required to create an account prior to purchasing.
Full issue PDFs are for PDA members only.
Note to pda.org users
The PDA and PDA bookstore websites (www.pda.org and www.pda.org/bookstore) are separate websites from the PDA JPST website. When you first join PDA, your initial UserID and Password are sent to HighWirePress to create your PDA JPST account. Subsequent UserrID and Password changes required at the PDA websites will not pass on to PDA JPST and vice versa. If you forget your PDA JPST UserID and/or Password, you can request help to retrieve UserID and reset Password below.
Log in using your username and password
Log in through your institution
Purchase access
patientACCESS
In This Issue
Jump to section
Related Articles
Cited By...
- No citing articles found.