Abstract
Siliconized stoppers, when used with parenteral drug products, have been shown to be a source of particulate contamination. In this study, five different variables: pH of the solution, buffer concentration, Teflon coating on the stopper, autoclaving cycle (F0), and lot-to-lot variation of the siliconization process were evaluated using an eight-run Plackett-Burman design with respect to their impact on the level of particulate contamination from siliconized stoppers. Results show that pH of the solution can significantly affect the particulate level of samples using siliconized stoppers (p < 0.05). An alkaline solution (pH = 8) was shown to produce a higher particulate load than an acid solution (pH = 4). The main effect of the remaining four variables was determined to be statistically insignificant (p > 0.15).
- Received November 30, 1992.
- Accepted April 12, 1993.
- Copyright © Parenteral Drug Association. All rights reserved.
PDA members receive access to all articles published in the current year and previous volume year. Institutional subscribers received access to all content. Log in below to receive access to this article if you are either of these.
If you are neither or you are a PDA member trying to access an article outside of your membership license, then you must purchase access to this article (below). If you do not have a username or password for JPST, you will be required to create an account prior to purchasing.
Full issue PDFs are for PDA members only.
Note to pda.org users
The PDA and PDA bookstore websites (www.pda.org and www.pda.org/bookstore) are separate websites from the PDA JPST website. When you first join PDA, your initial UserID and Password are sent to HighWirePress to create your PDA JPST account. Subsequent UserrID and Password changes required at the PDA websites will not pass on to PDA JPST and vice versa. If you forget your PDA JPST UserID and/or Password, you can request help to retrieve UserID and reset Password below.