Abstract
ABSTRACT: Dry heat resistance parameters for Neosartorya fischeri ascospores were obtained at 90°C and 95°C under 30%, 40%, 50%, 60%, and 75% relative humidity (RH) conditions. The dry heat treated spores were exposed to saturated water vapor (for 20–24 h at 4°C) prior to recovery in buffer held at two temperatures (0°C and 80°C). Approximately the same level of recovery was obtained at the two buffer temperatures except at the shortest heating times for the heat treatment carried at 30% and 40% RH, where the number of survivors was significantly higher for spores placed in the buffer held at 80°C. The effect of this high temperature was attributed to heat activation of the ascospores that remained dormant during the dry heat treatment conditions mentioned above. The wet heat resistance of N. fischeri ascospores was also determined at temperatures ranging from 82.5°C to 95°C. The results indicate that as the RH decreased, the heat resistance of the ascospores increased. There were about four orders of magnitude difference in the heat resistance between wet heat (100% RH) and the lowest dry heat treatment condition (30% RH).
- Received August 10, 1992.
- Accepted June 1, 1993.
- Copyright © Journal of Pharmaceutical Science and Technology(JPST). All rights reserved.
PDA members receive access to all articles published in the current year and previous volume year. Institutional subscribers received access to all content. Log in below to receive access to this article if you are either of these.
If you are neither or you are a PDA member trying to access an article outside of your membership license, then you must purchase access to this article (below). If you do not have a username or password for JPST, you will be required to create an account prior to purchasing.
Full issue PDFs are for PDA members only.
Note to pda.org users
The PDA and PDA bookstore websites (www.pda.org and www.pda.org/bookstore) are separate websites from the PDA JPST website. When you first join PDA, your initial UserID and Password are sent to HighWirePress to create your PDA JPST account. Subsequent UserrID and Password changes required at the PDA websites will not pass on to PDA JPST and vice versa. If you forget your PDA JPST UserID and/or Password, you can request help to retrieve UserID and reset Password below.