Abstract
Lyophilized pharmaceuticals are often sealed under reduced pressure and "vacuum testing" is done as a part of quality assurance. In this work the pressure Pv inside lyophilization vials was measured as a function of storage time after sealing at a chamber pressure Pc < 20 mtorr. Vials were of 50 mL nominal capacity (empty and with product) and 10 mL nominal capacity (with product). For all three sample types Pv was observed to rise to ~2 torr within ca. 50 hrs, then increase slowly to Pv = 5–10 torr after the lapse of 2300 hrs (3 months). Calculations based on outgassing and permeation of the stopper by O2, N2 and H2O demonstrate that vial pressure is primarily due to desorption of water vapor from the stopper into the headspace of the vial. The presence of a hydrophilic product decreases the rate of pressure rise, and Pv increases more rapidly in smaller vials. Results are discussed in terms of testing for seal integrity and for stopper effects on moisture in the product.
- Received September 15, 1993.
- Accepted January 18, 1994.
- Copyright © Parenteral Drug Association. All rights reserved.
PDA members receive access to all articles published in the current year and previous volume year. Institutional subscribers received access to all content. Log in below to receive access to this article if you are either of these.
If you are neither or you are a PDA member trying to access an article outside of your membership license, then you must purchase access to this article (below). If you do not have a username or password for JPST, you will be required to create an account prior to purchasing.
Full issue PDFs are for PDA members only.
Note to pda.org users
The PDA and PDA bookstore websites (www.pda.org and www.pda.org/bookstore) are separate websites from the PDA JPST website. When you first join PDA, your initial UserID and Password are sent to HighWirePress to create your PDA JPST account. Subsequent UserrID and Password changes required at the PDA websites will not pass on to PDA JPST and vice versa. If you forget your PDA JPST UserID and/or Password, you can request help to retrieve UserID and reset Password below.