Abstract
The stability of carzelesin in a polyethylene glycol 400 (PEG 400)/absolute ethanol/polysorbate 80 (Tween 80) (6:3:1, v/v/v) formulation (PET formulation) was investigated as a function of the inter-batch variability of the three excipients. Twenty different PET formulations were tested and the stability of carzelesin in the PET formulation was found to be influenced by the type of PEG 400 used. Subsequent investigations showed that the pH of PEG 400, and consequently the pH of the PET formulation, was responsible for the variable stability characteristics of carzelesin in the PET formulation. The higher the pH of the PET formulation, the higher the rate of degradation of carzelesin in PET. The major degradation products were found to be U-76,073 and U-76,074.
- Received January 4, 1995.
- Accepted May 2, 1995.
- Copyright © Parenteral Drug Association. All rights reserved.
PDA members receive access to all articles published in the current year and previous volume year. Institutional subscribers received access to all content. Log in below to receive access to this article if you are either of these.
If you are neither or you are a PDA member trying to access an article outside of your membership license, then you must purchase access to this article (below). If you do not have a username or password for JPST, you will be required to create an account prior to purchasing.
Full issue PDFs are for PDA members only.
Note to pda.org users
The PDA and PDA bookstore websites (www.pda.org and www.pda.org/bookstore) are separate websites from the PDA JPST website. When you first join PDA, your initial UserID and Password are sent to HighWirePress to create your PDA JPST account. Subsequent UserrID and Password changes required at the PDA websites will not pass on to PDA JPST and vice versa. If you forget your PDA JPST UserID and/or Password, you can request help to retrieve UserID and reset Password below.