Abstract
The appropriate z-value to use in integrating heat process time-temperature data in the temperature range of 120.0–140.0°C (248.0–284.0°F) is discussed. We conclude that for control of Clostridium botulinum there is little risk in extrapolating a public health F0-value for C. botulinum to temperatures in the 132.0–138.0°C (270.0–280.0°F) range using a z-value of 10.0°C (18.0°F). It would seem prudent, at this time, when extrapolating data to conditions in the 132.0–138.0°C (270.0–280.0°F) range, that as a starting point an F0-value of 3.0 minutes be used as the minimum public health process. A design z-value of 10.0°C (18.0°F) is appropriate for Clostridium sporogenes to temperatures of 140.0°C (284.0°F). To control thermophilic microorganisms such as Bacillus stearothermophilus and Bacillus coagulans with processes at temperatures from 120.0–140.0°C (248.0– 284.0°F), the effective z-value will be in the range of 7.0–8.0°C (12.6–14.4°F) instead of 10.0°C (18.0°F). This means that when we design and calculate processes at temperatures from 120.0–140.0°C (248.0–284.0°F), using a z-value of 10.0°C (18.0°F), the lethal effect against these organisms will be much larger than indicated by the F0-value of the process.
- Received February 6, 1995.
- Accepted July 21, 1995.
- Copyright © Parenteral Drug Association. All rights reserved.
PDA members receive access to all articles published in the current year and previous volume year. Institutional subscribers received access to all content. Log in below to receive access to this article if you are either of these.
If you are neither or you are a PDA member trying to access an article outside of your membership license, then you must purchase access to this article (below). If you do not have a username or password for JPST, you will be required to create an account prior to purchasing.
Full issue PDFs are for PDA members only.
Note to pda.org users
The PDA and PDA bookstore websites (www.pda.org and www.pda.org/bookstore) are separate websites from the PDA JPST website. When you first join PDA, your initial UserID and Password are sent to HighWirePress to create your PDA JPST account. Subsequent UserrID and Password changes required at the PDA websites will not pass on to PDA JPST and vice versa. If you forget your PDA JPST UserID and/or Password, you can request help to retrieve UserID and reset Password below.