Abstract
The migration of substances from rubber packaging materials into drug products can be significant with certain packaging materials in contact with organic solvent systems. Recommendations for testing drug products for leachables are continually evolving to address new developments. Testing packaging materials using simulated solvents is not always an acceptable protocol for the pharmaceutical industry. We describe a rational strategy for evaluation of the drug product for packaging extractables. A profile of the extractables from rubber packaging materials was made with a range of organic solvents and stress conditions to provide information on substances to target in the drug product. The drug product was evaluated to determine if the matrix would cause interferences that might inhibit detection of the found extractables. Analytical methods were selected based on these findings. The procedures were validated according to FDA guidelines. A stability program using time and storage conditions as variables provided information for acceptance criteria. This same strategy can be used on other types of pharmaceuticals and packaging materials.
- Received January 15, 1997.
- Accepted August 1, 1997.
- Copyright © Parenteral Drug Association. All rights reserved.
PDA members receive access to all articles published in the current year and previous volume year. Institutional subscribers received access to all content. Log in below to receive access to this article if you are either of these.
If you are neither or you are a PDA member trying to access an article outside of your membership license, then you must purchase access to this article (below). If you do not have a username or password for JPST, you will be required to create an account prior to purchasing.
Full issue PDFs are for PDA members only.
Note to pda.org users
The PDA and PDA bookstore websites (www.pda.org and www.pda.org/bookstore) are separate websites from the PDA JPST website. When you first join PDA, your initial UserID and Password are sent to HighWirePress to create your PDA JPST account. Subsequent UserrID and Password changes required at the PDA websites will not pass on to PDA JPST and vice versa. If you forget your PDA JPST UserID and/or Password, you can request help to retrieve UserID and reset Password below.
