Abstract
Proposed requirements for pharmaceutical package integrity testing outlined in the EU Guide for Sterile Medicinal Products may make it necessary to evaluate and validate alternate ways to perform 100% leak inspection. One such method is high voltage leak detection (HVLD). Even though HVLD has been used for glass ampoules and vials for years, qualification and validation strategies are not well established. In this article, we describe and discuss our practical approach to validation and the protocols used to qualify and validate a high voltage leak detector for use with blow-fill-seal containers. For this work, we used laser drilled pinholes as a model for pinholes produced during manufacturing and defined a “window diagram.” This diagram allowed us to plot the parameters of influence and the settings of the HVLD in an easy to visualize pictorial display. In the validation step, we initially determined the most sensitive standard integrity test for our product and container design from the available choices, the vacuum chamber, dye bath and microbial challenge visual inspection tests. In the next phase of our work, the HVLD was crossed-validated against the most sensitive of these tests, the dye bath visual inspection test. This was accomplished with a large number of containers mixed with deliberately defective ampoules. Our conclusion from this work is that the HVLD is an appropriate and feasible integrity test for 100% inspection of blow-fill-seal containers.
Footnotes
- Received December 23, 1997.
- Accepted May 26, 1998.
- Copyright © Parenteral Drug Association. All rights reserved.
PDA members receive access to all articles published in the current year and previous volume year. Institutional subscribers received access to all content. Log in below to receive access to this article if you are either of these.
If you are neither or you are a PDA member trying to access an article outside of your membership license, then you must purchase access to this article (below). If you do not have a username or password for JPST, you will be required to create an account prior to purchasing.
Full issue PDFs are for PDA members only.
Note to pda.org users
The PDA and PDA bookstore websites (www.pda.org and www.pda.org/bookstore) are separate websites from the PDA JPST website. When you first join PDA, your initial UserID and Password are sent to HighWirePress to create your PDA JPST account. Subsequent UserrID and Password changes required at the PDA websites will not pass on to PDA JPST and vice versa. If you forget your PDA JPST UserID and/or Password, you can request help to retrieve UserID and reset Password below.