Abstract
The application of Response Surface Methodology (RSM) to the performance validation of a water cascade sterilizer is described. The methodology was successfully used to 1) identify the cold and hot zones within maximum load configurations through three dimensional thermal mapping, 2) demonstrate the consistency of consecutive sterilization cycles in companion sterilizers, and 3) set target sterilizing values (F0) to achieve a high statistical assurance that any location will be above a minimum F0 (sterility assurance) and below a maximum F0 (for stability considerations).
Footnotes
- Received August 3, 1998.
- Accepted December 1, 1998.
- Copyright © Parenteral Drug Association. All rights reserved.
PDA members receive access to all articles published in the current year and previous volume year. Institutional subscribers received access to all content. Log in below to receive access to this article if you are either of these.
If you are neither or you are a PDA member trying to access an article outside of your membership license, then you must purchase access to this article (below). If you do not have a username or password for JPST, you will be required to create an account prior to purchasing.
Full issue PDFs are for PDA members only.
Note to pda.org users
The PDA and PDA bookstore websites (www.pda.org and www.pda.org/bookstore) are separate websites from the PDA JPST website. When you first join PDA, your initial UserID and Password are sent to HighWirePress to create your PDA JPST account. Subsequent UserrID and Password changes required at the PDA websites will not pass on to PDA JPST and vice versa. If you forget your PDA JPST UserID and/or Password, you can request help to retrieve UserID and reset Password below.
