Abstract
The rational development of a physical test method to evaluate the microbial barrier properties of sterile containers necessitates its correlation to microbiological exclusion. This can be accomplished by direct or indirect correlation. In the former, the proposed physical test is directly compared to microbial challenges using appropriate test units that stimulate container leaks at both high and low probabilities of microbial ingress. Previous work has demonstrated the development of a direct correlation using helium leak rate methods and microbial immersion challenges. An indirect correlation can be established by comparing the proposed physical method to well-defined leakage standards that represent various known levels of microbial ingress. Thus the quality assurance properties of a physical test method can be established by comparison to another physical test method that has been previously characterized. This approach has the distinct advantages of being faster, quantitatively rigorous, and less subject to the vicissitudes of microbial testing. This approach was demonstrated by comparing the helium leak rate method to vacuum decay testing. Additionally it was demonstrated that vacuum decay testing was a fast and reproducible method for detecting leaks of about 1 to 2 mm. Leaks were simulated by affixing micropipettes into glass vials.
Footnotes
- Received December 21, 1998.
- Accepted April 21, 1999.
- Copyright © Parenteral Drug Association. All rights reserved.
PDA members receive access to all articles published in the current year and previous volume year. Institutional subscribers received access to all content. Log in below to receive access to this article if you are either of these.
If you are neither or you are a PDA member trying to access an article outside of your membership license, then you must purchase access to this article (below). If you do not have a username or password for JPST, you will be required to create an account prior to purchasing.
Full issue PDFs are for PDA members only.
Note to pda.org users
The PDA and PDA bookstore websites (www.pda.org and www.pda.org/bookstore) are separate websites from the PDA JPST website. When you first join PDA, your initial UserID and Password are sent to HighWirePress to create your PDA JPST account. Subsequent UserrID and Password changes required at the PDA websites will not pass on to PDA JPST and vice versa. If you forget your PDA JPST UserID and/or Password, you can request help to retrieve UserID and reset Password below.