Abstract
Brevundimonas diminuta (ATCC 19146) is a standard organism for validation of sterilizing-grade membrane filters. Cell size is critical for the determination of retention characteristics of 0.2 μm rated membrane filters. In this study, cell size changes of B. diminuta cultured under different physiologic states and variable agitations at 50, 100 and 200 rpm were measured by a particle size analyzer and scanning electron microscope (SEM). The smallest cells were obtained at initial stationary phase in saline lactose broth (SLB) as a shaking culture at 50 rpm. Cells grown under agitation at 50, 100 and 200 rpm showed an increase of specific growth rate (μ), about 2.9, 3.6 and 3.6 fold, respectively, compared to the non-agitated cells in SLB media. These results suggested that the cell size decreased proportionally with increase of the specific growth rate (μ) in SLB. These size changes were associated with penetration through a 0.2 μm rated cellulose acetate filter. A scale-down filtration system was developed and performed bacterial challenge test and bubble point test with cells cultured in SLB. Cells grown under agitation conditions in SLB were not retained by 0.2 μm rated membrane filter.
Footnotes
- Copyright © Parenteral Drug Association. All rights reserved.
PDA members receive access to all articles published in the current year and previous volume year. Institutional subscribers received access to all content. Log in below to receive access to this article if you are either of these.
If you are neither or you are a PDA member trying to access an article outside of your membership license, then you must purchase access to this article (below). If you do not have a username or password for JPST, you will be required to create an account prior to purchasing.
Full issue PDFs are for PDA members only.
Note to pda.org users
The PDA and PDA bookstore websites (www.pda.org and www.pda.org/bookstore) are separate websites from the PDA JPST website. When you first join PDA, your initial UserID and Password are sent to HighWirePress to create your PDA JPST account. Subsequent UserrID and Password changes required at the PDA websites will not pass on to PDA JPST and vice versa. If you forget your PDA JPST UserID and/or Password, you can request help to retrieve UserID and reset Password below.