Abstract
Background: Pharmaceutical aseptic filling lines are used to fill sterile biotechnology products without affecting their quality by a terminal sterilization step. Standard grade A filling environments are required to have < 1 colony-forming unit (CFU) per cubic meter (m3) of air. Aseptic filling is the production cycle with one of the highest contamination risks. A typical method of contamination monitoring is to actively draw air and filter it through special gelatin filters.
Objective: The study aims to establish whether continuous sampling provides effective monitoring for the entire production process by determining whether trapped organisms can withstand long-term drying stress with unaltered recovery.
Methods: In two experimental phases, the study examined microbial recovery in long-term air-stressed membranes as well as the viability of microorganisms on gelatin filters during 8-hour runs of filtration with high-efficiency particulate air-filtered air from a laminar flow hood using the MD 8 Airscan system. Stressed and unstressed filters were compared with parallel-run reference filters as controls. The CFUs were counted and the genus of the identified microorganism populations determined to examine any changes in microbiological flora occurring during continuous long-term sampling.
Results: Compared to the unstressed reference filters, neither total recovery nor recovered bacterial diversity changed. No statistically significant differences in CFUs were found between test filters and reference filters, nor were any statistically significant differences found in the microbiological flora between test filters and reference filters. CFU populations were comparable in both experiments.
Conclusion: Eight hours of continuous air sampling on gelatin filters with the MD 8 Airscan system did not affect total recovery or change the diversity of recovered microorganisms compared to the controls.
- Long-term air sampling
- Microbiological air monitoring
- Gelatin filters
- MD 8 Airscan
- Environmental monitoring
- Pharmaceutical production
Footnotes
- Copyright © Parenteral Drug Association. All rights reserved.
PDA members receive access to all articles published in the current year and previous volume year. Institutional subscribers received access to all content. Log in below to receive access to this article if you are either of these.
If you are neither or you are a PDA member trying to access an article outside of your membership license, then you must purchase access to this article (below). If you do not have a username or password for JPST, you will be required to create an account prior to purchasing.
Full issue PDFs are for PDA members only.
Note to pda.org users
The PDA and PDA bookstore websites (www.pda.org and www.pda.org/bookstore) are separate websites from the PDA JPST website. When you first join PDA, your initial UserID and Password are sent to HighWirePress to create your PDA JPST account. Subsequent UserrID and Password changes required at the PDA websites will not pass on to PDA JPST and vice versa. If you forget your PDA JPST UserID and/or Password, you can request help to retrieve UserID and reset Password below.