Abstract
The ability of pressure-driven leaks to provide an effective barrier against microbial ingress was investigated experimentally. The leak was simulated by circulating growth promoting media through a section of flexible tubing that had a ¾-inch breach. The flow rate of the media was adjusted until the leak was barely visible; the leak rate was minimized to enhance the possibility of microbial ingress through the breach. The site of the breach was repeatedly inoculated with an actively growing population of Pseudomonas aeruginosa—a highly motile bacterium—suspended in a nutrient-rich medium. The breach was exposed to approximately 140 million organisms over a period of 8 h. This level of contamination greatly exceeds the microbial exposure that a breach would be subjected to in an aseptic manufacturing environment.
The data show that microbial ingress did not occur under the above conditions. This indicates that pressure-driven leaks in flexible tubing can provide an effective barrier against microbial ingress, and that the integrity of the sterile boundary can be maintained during such leaks. The results of this investigation could be used to perform risk assessment analyses of the potential for microbial ingress through breaches in aseptic manufacturing systems.
Footnotes
- Copyright © Parenteral Drug Association. All rights reserved.
PDA members receive access to all articles published in the current year and previous volume year. Institutional subscribers received access to all content. Log in below to receive access to this article if you are either of these.
If you are neither or you are a PDA member trying to access an article outside of your membership license, then you must purchase access to this article (below). If you do not have a username or password for JPST, you will be required to create an account prior to purchasing.
Full issue PDFs are for PDA members only.
Note to pda.org users
The PDA and PDA bookstore websites (www.pda.org and www.pda.org/bookstore) are separate websites from the PDA JPST website. When you first join PDA, your initial UserID and Password are sent to HighWirePress to create your PDA JPST account. Subsequent UserrID and Password changes required at the PDA websites will not pass on to PDA JPST and vice versa. If you forget your PDA JPST UserID and/or Password, you can request help to retrieve UserID and reset Password below.