Abstract
During a closed connected single-use monoclonal antibody (mAb) purification process, samples for leachables screening were gathered from two parallel processes (using different capturing chromatography), from perfusion culture to final storage bags. These samples were prepared and analyzed using screening methods for HS-GC-MS, GC-MS, LC-QToF/ESI pos and neg, to be able to identify a broad spectrum of leachables. The identified compounds were sorted into sample points from different steps of the mAb process, compared with available extractables data mapped from the process equipment used. It was therefore possible to compare leachables with extractables and at the same time follow the appearance and disappearance of leachables during the process. A large number of leachables could be detected, many of which were predicted by the extractable mapping and explained by the utilized single-use equipment, for example, several ethylene glycols and laurolactam, increasing after a filtration but decreasing during the next process step. The data verifies that the purification process contains several sinks for leachables, which is a common assumption when risk-assessing extractables and leachables. The vast majority of identified leachables were removed as quickly as they were released, with the logical exception of leachables from the final storage bags plus the material and processes associated with the final step of the process.
- Extractables and leachables
- Leachable screening
- mAb
- Biomanufacturing
- Extractables and leachables testing
- Single-use bioreactor
- © PDA, Inc. 2024
PDA members receive access to all articles published in the current year and previous volume year. Institutional subscribers received access to all content. Log in below to receive access to this article if you are either of these.
If you are neither or you are a PDA member trying to access an article outside of your membership license, then you must purchase access to this article (below). If you do not have a username or password for JPST, you will be required to create an account prior to purchasing.
Full issue PDFs are for PDA members only.
Note to pda.org users
The PDA and PDA bookstore websites (www.pda.org and www.pda.org/bookstore) are separate websites from the PDA JPST website. When you first join PDA, your initial UserID and Password are sent to HighWirePress to create your PDA JPST account. Subsequent UserrID and Password changes required at the PDA websites will not pass on to PDA JPST and vice versa. If you forget your PDA JPST UserID and/or Password, you can request help to retrieve UserID and reset Password below.