Abstract
Copoly (dl-lactic/glycolic acid) microparticles for sustained release of a water-soluble drug (Thyrotropin releasing hormone: TRH) were prepared by a spray drying method. A higher entrapment ratio was achieved with the spray drying method than with the in-water drying method. In order to avoid agglomeration of the microparticles, a double-nozzle spray drying method was designed using mannitol as an anti-adherent. The surface of the spray-dried microparticles was coated with mannitol, and the extent of agglomeration was decreased. Acetonitrile was the most suitable solvent for microencapsulation using the double-nozzle spray drying method because the initial burst of TRH from the microparticles during the first day was the smallest. When PLGA with a weight-average molecular weight of 14,000 was used, constant release of TRH continued for one month with a small initial burst. In conclusion, the production of biodegradable microparticles by the double-nozzle spray drying method appears to be an attractive alternative to conventional microencapsulation methods.
- Received August 16, 1994.
- Accepted February 6, 1995.
- Copyright © Parenteral Drug Association. All rights reserved.
PDA members receive access to all articles published in the current year and previous volume year. Institutional subscribers received access to all content. Log in below to receive access to this article if you are either of these.
If you are neither or you are a PDA member trying to access an article outside of your membership license, then you must purchase access to this article (below). If you do not have a username or password for JPST, you will be required to create an account prior to purchasing.
Full issue PDFs are for PDA members only.
Note to pda.org users
The PDA and PDA bookstore websites (www.pda.org and www.pda.org/bookstore) are separate websites from the PDA JPST website. When you first join PDA, your initial UserID and Password are sent to HighWirePress to create your PDA JPST account. Subsequent UserrID and Password changes required at the PDA websites will not pass on to PDA JPST and vice versa. If you forget your PDA JPST UserID and/or Password, you can request help to retrieve UserID and reset Password below.