Abstract
Particles isolated from a pre-filled syringe containing a protein-based solution were identified as aggregated protein and tungsten. The origin of the tungsten was traced to the tungsten pins used in the supplier's syringe barrel forming process. A tungsten recovery study showed that the vacuum stopper placement process has a significant impact on the total amount of tungsten in solutions. The air gap formed in the syringe funnel area (rich in residual tungsten) becomes accessible to solutions when the vacuum is pulled. Leachable tungsten deposits that were not removed by the supplier's wash process are concentrated in this small area. Extraction procedures used to measure residual tungsten in empty syringes would under-report the tungsten quantity unless the funnel area is wetted during the extraction. Improved syringe barrel forming and washing processes at the supplier have lowered the residual tungsten content and significantly reduced the risk of protein aggregate formation. This experience demonstrates that packaging component manufacturing processes, which are outside the direct control of drug manufacturers, can have an impact on the drug product quality. Thus close technical communication with suppliers of product contact components plays an important role in making a successful biotherapeutic.
- © PDA, Inc. 2010
PDA members receive access to all articles published in the current year and previous volume year. Institutional subscribers received access to all content. Log in below to receive access to this article if you are either of these.
If you are neither or you are a PDA member trying to access an article outside of your membership license, then you must purchase access to this article (below). If you do not have a username or password for JPST, you will be required to create an account prior to purchasing.
Full issue PDFs are for PDA members only.
Note to pda.org users
The PDA and PDA bookstore websites (www.pda.org and www.pda.org/bookstore) are separate websites from the PDA JPST website. When you first join PDA, your initial UserID and Password are sent to HighWirePress to create your PDA JPST account. Subsequent UserrID and Password changes required at the PDA websites will not pass on to PDA JPST and vice versa. If you forget your PDA JPST UserID and/or Password, you can request help to retrieve UserID and reset Password below.
Log in using your username and password
Log in through your institution
Purchase access
patientACCESS
Jump to section
Related Articles
Cited By...
- Holistic Extractables and Leachables Program: Evaluations of Prefilled Syringe Systems for Biotechnology Products
- A Comparison of Protein Stability in Prefillable Syringes Made of Glass and Plastic
- Characterization of Protein Aggregating Tungstates: Electrospray Mass Spectrometry Analysis of Extracts from Prefilled Syringes and from Tungsten Pins Used in the Manufacture of Syringes
- Development and Justification of a Risk Evaluation Matrix To Guide Chemical Testing Necessary To Select and Qualify Plastic Components Used in Production Systems for Pharmaceutical Products
- Creating a Holistic Extractables and Leachables (E&L) Program for Biotechnology Products
- Materials in Manufacturing and Packaging Systems as Sources of Elemental Impurities in Packaged Drug Products: A Literature Review
- Development of an Inductively Coupled Plasma Mass Spectrometry Method for Quantification of Extracted Tungsten from Glass Prefilled Syringes Used as a Primary Packaging for Pharmaceutical and Therapeutic Protein Products
- Inhibition of Tungsten-Induced Protein Aggregation by Cetyl Trimethyl Ammonium Bromide