Abstract
Cleaning validation is the documented evidence that shows the effectiveness of cleaning procedures for the removal of product residues and other contaminants. The cleaning procedures must be validated and methods to determine trace amounts of drugs have to be considered with special attention. An ultra-high-performance liquid chromatography-ultraviolet (UHPLC-UV) method for the determination of mometasone furoate residues on stainless-steel surfaces was developed and validated in order to control a cleaning procedure. The chromatography separation was achieved on a Waters Acquity UPLC HSS T3 column (50 × 2.1 mm, 1.8 µm) at 40°C using acetonitrile and water (1:1, v/v) as the mobile phase at a flow rate of 0.5 mL/min. The injection volume was 2 µL, and the detection was performed at 254 nm. The swab and rinse procedures were optimized in order to obtain a recovery higher than 90% of mometasone furoate from stainless-steel surfaces, using ethanol as the extraction solvent. The method was validated in the range of 0.2–2.6 µg/mL and showed appropriate selectivity, limit of detection and quantification, linearity, precision, accuracy, and robustness. This method was found to be simple, fast, and sensitive for determination of mometasone furoate residues and, therefore, can be used for cleaning validation analysis.
- Mometasone furoate
- Cleaning validation
- Swab sampling
- Rinse sampling
- Ultra-high-performance liquid chromatography
- © PDA, Inc. 2020
PDA members receive access to all articles published in the current year and previous volume year. Institutional subscribers received access to all content. Log in below to receive access to this article if you are either of these.
If you are neither or you are a PDA member trying to access an article outside of your membership license, then you must purchase access to this article (below). If you do not have a username or password for JPST, you will be required to create an account prior to purchasing.
Full issue PDFs are for PDA members only.
Note to pda.org users
The PDA and PDA bookstore websites (www.pda.org and www.pda.org/bookstore) are separate websites from the PDA JPST website. When you first join PDA, your initial UserID and Password are sent to HighWirePress to create your PDA JPST account. Subsequent UserrID and Password changes required at the PDA websites will not pass on to PDA JPST and vice versa. If you forget your PDA JPST UserID and/or Password, you can request help to retrieve UserID and reset Password below.