Abstract
In the present study, an in situ nondisintegrating polymeric capsular system in achieving delayed as well as improved osmotic flow for the model drug cefadroxil was developed. In situ formed asymmetric membrane capsule was prepared by precipitation of the asymmetric membrane (AM) on the walls of conventional hard gelatin capsules in fabricated glass holders via a dry phase inversion process. The effect of different formulation variables were studied based on a 23 factorial design as one variable changed from one level to another, namely, the level of osmogen, ethylcellulose, and pore former, apart from studying the effect of varying osmotic pressure and agitation intensity on drug release. Scanning electron microscopy showed an outer, dense, non-porous region and an inner, lighter, porous region for the prepared AM inside, and a gelatin layer outside. Statistical testing (Dunnett multiple comparison test) was applied for in vitro drug release (n = 6) at P < 0.05. The best formulation in the design closely corresponded to the extra design checkpoint formulation by a similarity (f2) value of 96.18. The drug release was independent of the agitation intensity but dependent on the osmotic pressure of the dissolution media. The release kinetics followed the Higuchi model, and the mechanism of release was Fickian diffusion.
LAY ABSTRACT: The asymmetric membrane capsule (AMC) is a unique drug delivery system that looks like a conventional hard gelatin capsule but has significant advantages over it. In the present study, a system was made that had an outer disintegrating hard gelatin capsule and an inner nondisintegrating polymeric capsular system for delivering a model drug cefadroxil. The inner nondisintegrating polymeric capsular system was the AMC, which was prepared by precipitation of the asymmetric membrane (AM) on the walls of conventional hard gelatin capsules in fabricated glass holders via a dry phase inversion process. The effect of different formulation variables that might affect the drug release were studied based on a 23 factorial design. The formulation variables were level of osmogen, ethylcellulose, and pore former. The effect of varying osmotic pressure and agitation intensity on drug release was also studied. Scanning electron microscopy showed an outer, dense, nonporous region and an inner, lighter, porous region for the prepared AM inside, and a gelatin layer outside. Statistical testing was applied for in vitro drug release. Results showed the drug release to be independent of the agitation intensity but dependent on the osmotic pressure of the dissolution media. The release kinetics followed the Higuchi model, and the mechanism of release was Fickian diffusion.
- ©PDA, Inc. 2011
PDA members receive access to all articles published in the current year and previous volume year. Institutional subscribers received access to all content. Log in below to receive access to this article if you are either of these.
If you are neither or you are a PDA member trying to access an article outside of your membership license, then you must purchase access to this article (below). If you do not have a username or password for JPST, you will be required to create an account prior to purchasing.
Full issue PDFs are for PDA members only.
Note to pda.org users
The PDA and PDA bookstore websites (www.pda.org and www.pda.org/bookstore) are separate websites from the PDA JPST website. When you first join PDA, your initial UserID and Password are sent to HighWirePress to create your PDA JPST account. Subsequent UserrID and Password changes required at the PDA websites will not pass on to PDA JPST and vice versa. If you forget your PDA JPST UserID and/or Password, you can request help to retrieve UserID and reset Password below.